PPS43 Sudajev - Fake barrel & fake bolt. ***Perfect for display, Non functional model *** 3dPrintedStuff
PPS43 Sudajev - Fake barrel & fake bolt ***
Perfect for display, Non functional model ***
Details:
Small changes to support instalation.
Firing pin oversized for function restriction.
It is suggested to print firing pin,extractor and barrelchamber out of softer material (like TPU) to prevent brakeing upon impact.
***Additional parts needed: Iron tube od-16mm Id-14mm 210mm Long (16x1x210mm) For nice optic apply chemical bluing or black spraypaint.
Superglue for gluing firing pin extractor bolt handle, chamber and barrel tip.
All parts print ready with brim and support.
Long pins and barrel best to print horizontal.
| Price | $20.00 |
| Category | Hobby |
| Purchases | 2 |
| Views | 1263 |
| Likes | 0 |
| Uploaded | 06/11/2021 |
This work is licensed under the Redpah License.
| 7.62Tokarev.stl | 776 KB |
| Barrel(no pipe).stl | 330 KB |
| BarrelRetention.stl | 95 KB |
| berrelTip.stl | 572 KB |
| Bolt.stl | 1000 KB |
| BoltHandle.stl | 210 KB |
| extraktor.stl | 33 KB |
| Fpin.stl | 610 KB |
| Fpin2.stl | 677 KB |
| PPS43Chamber.stl | 515 KB |
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.
No comments yet!
Please login or register to write a comment.