Display cover for Hictop 3D printer HIC-3DP17 Sergio Lanna

After having moved the display of my Hictop, as I have set up the housing for 3 strands of filaments at the top, I needed to cover the back of the display.
You need for installing 3 12 mm spacer and 3 20 mm screwPOST PRINTING:To install the cover, use 12 mm spacers and 20 mm screws. remove 3 of the old screws on the display board, leaving one of the screws at the bottom to hold the card fixed, then insert 3 new 20 mm-long screws into the cover, insert the 12 mm spacers and apply the cover to the card to match the screws with the holes on the board. screw the 3 screws and you're done!