RC Mini Loader Larkin Mikhael

There are only 44 pieces))) is not difficult to understand.
Small video: https://youtu.be/ac2Qkmy_yXM


Screws: M3, M5, M8

Weight is only 2,8kg (6,17LB)

Size: 400mm x 270mm x 260mm

Working area printer 18x18 mm
minimum

I used plastic pla. After printing, the parts were painted textured paint (anti gravel). And only then I painted the usual paint. So I get the effect of an old metal

Motors: https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=26268

These powerful motors, but the speed will be less: http://www.hobbyking.com/hobbyking/store/__26267__133RPM_Brushed_Motor_w_75_1_Gearbox.html

Big servo: https://hobbyking.com/en_us/hobbykingtm-high-torque-servo-mg-bb-w-proof-12-8kg-0-22sec-58g.html

Mini servo: https://hobbyking.com/en_us/hobbykingtm-hk15148b-digital-servo-2-8kg-0-14sec-19g.html

Motor on aliexpress: https://ru.aliexpress.com/item/12V-133RPM-Connect-High-Torque-Rotary-Speed-DC-Geared-Gearbox-Motor/32693625987.html?spm=2114.30010708.3.26.5US9Ik&ws_ab_test=searchweb0_0,searchweb201602_2_10093_10091_10090_10088_10089,searchweb201603_1&btsid=e00655cc-93d0-4203-b99c-68930730f6fe

12MM Hex connector: http://www.ebay.com/itm/3-4-5-6-7-mm-Brass-Shaft-Couplings-Coupler-Motor-12MM-Hex-connector-DIY-Screws-/181739759207?var=&hash=item2a5088a667:m:mHCAxiTwXWJ3r5XeMDFTPTw

ESC: http://www.hobbyking.com/hobbyking/store/__32025__HobbyKing_X_Car_45A_Brushed_Car_ESC.html


Two on the left side of the motor are connected in parallel to a single speed controller. the right side is also parallel to the second speed control. Further speed controllers are connected to the receiver from the model aircraft equipment. the first and second channel. Control equipment of RC Planes. I use this: http://www.hobbyking.com/hobbyking/store/__8992__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_2_v2_Firmware_.хтмл
(but it can be less expensive and does not matter.)

how to configure the console's hard to explain in a few words. each country has its own forum on aircraft modeling. There, people can easily prompt to configure the remote. Simply place a link to the video, and they understand everything.Now the international

forum: http://www.rcgroups.com/forums/index.php

Price $9.99
Category Hobby
Purchases 17
Views 1585
Likes 4
Uploaded 12/26/2016

This work is licensed under the Redpah License.

1.stl 2 MB
2.stl 1 MB
3-1.stl 202 KB
3-2.stl 203 KB
4.stl 2 MB
5.stl 308 KB
6.stl 663 KB
7.stl 927 KB
8.stl 228 KB
9.stl 252 KB
10-1.stl 97 KB
10-2.stl 97 KB
11.stl 75 KB
12-1.stl 230 KB
12-2.stl 230 KB
13.stl 163 KB
14.stl 50 KB
15.stl 137 KB
16.stl 987 KB
16-1.stl 536 KB
16-2.stl 640 KB
17-1.stl 93 KB
17-2.stl 94 KB
18-1.stl 543 KB
18-2.stl 543 KB
19-1.stl 176 KB
19-2.stl 104 KB
20.stl 562 KB
21.stl 267 KB
22.stl 786 KB
23.stl 252 KB
24-1.stl 169 KB
24-2.stl 161 KB
25-1.stl 326 KB
25-2.stl 327 KB
26.stl 108 KB
27.stl 656 KB
28.stl 490 KB
29.stl 115 KB
30.stl 5 MB
31.stl 912 KB
32.stl 794 KB
33-1.stl 919 KB
33-2.stl 919 KB

Comments

Question - do all files need supports - the samples on thingiverse all have a small amount (less than 0.1°) of list to them and do not lay flat - otherwise I would like to buy....
use auto placement. I am using the program Repetier-Host. everything is fine.
Please login or register to write a comment.