Pelton (Water) Wheel Anida Technologies

File: Pelton wheel.stl
Name: Pelton Wheel
PLA Material:102.86 grams ( 0.227 lbs)
Infill = 10%
Size: 194.26 mm (7.65") x195.02 mm ( 7.68") x 15.75 mm ( .62")
Resolution: 0.20mm
Layers: 85 layers
Rafts: Yes
Supports: No
Print Time: 11 hr 45 min
Function: This is a Pelton (water) wheel ready to mount on a hub of a DC motor or a generator.  The hub can be attached to a hole in the center with 4 bolts around it.  If printed 1:1 then the 12 indiviudal cups are bolted with a M5 x 12mm (or #10-32 x .50) machine screw and hex nut.  The water should hit the cups perpendicularly which means there needs to be a port or jet to direct the incoming water.

Price $2.99
Category DIY
Purchases 1
Views 2974
Likes 1
Uploaded 05/27/2016

This work is licensed under the Redpah License.

Pelton Wheel P.STL 4 MB
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.


No comments yet!

Please login or register to write a comment.