3d printed gearbox right hand turboprint3d
This i a worm drive gearbox that fits a 540 gearbox , designed for a robot but could be used for anything else, or other motors. the out put shaft is 8mm with a 10mm D section , will make one for strait shaft for easier production. this part will be updated in the future .
instructions availible at https://turboprint3d.ca/
| Price | Free |
| Category | DIY |
| Downloads | 6406 |
| Views | 2052 |
| Likes | 3 |
| Uploaded | 01/6/2021 |
This work is licensed under a Creative Commons Attribution 4.0 International License.
|
right_hand_gearbox_main_houseing.stl
(4 MB) |
View 3D Render Download |
|
right_hand_main_housing_cover.stl
(1 MB) |
View 3D Render Download |
|
worm_gear.stl
(6 MB) |
View 3D Render Download |
|
Worm_follower_gear_10mm_d_shaft.stl
(7 MB) |
View 3D Render Download |
|
540_motor_mount.stl
(597 KB) |
View 3D Render Download |
|
540_strait_coupling.stl
(1 MB) |
View 3D Render Download |
|
2mm_houseing_side_bushing_spacer.stl
(85 KB) |
View 3D Render Download |
|
5mm_spacer_for_cover_side.stl
(99 KB) |
View 3D Render Download |
|
stepped_shaft_model_for_referance.stl
(114 KB) |
View 3D Render Download |
|
follower_gear_8mm_strait_shaft_4mm_screws.stl
(8 MB) |
View 3D Render Download |
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.
No comments yet!
Please login or register to write a comment.