Smartphone camera grip - camera holder 3D printlines
Very simple and easy to print smartphone camera grip for shooting photos and turn your smart phone into pro camera
3 parts and very easy to assemble and you can also use it with your tripod ( there is a threaded hole in the bottom of the grop body ( 1/4″ 20 pitch UNC Unified Coarse Thread (6.35mm outer diameter 5.35mm core hole diameter)
you will need the following resources :
1. Standard Bluetooth remote shutter
2. 2 / short springs - photo included - and if springs are not available - you may replace it with an elastic rubber band and fix it on the other side
3. 3 /screws - photo included
Files format : STL
Price | $3.00 |
Category | DIY |
Purchases | 0 |
Views | 340 |
Likes | 0 |
Uploaded | 02/19/2023 |
This work is licensed under the Redpah License.
part_1.stl | 1 MB |
part_2.stl | 1 MB |
part_3.stl | 81 KB |
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.
No comments yet!
Please login or register to write a comment.