display base - D-zero/0.5 - masa_4dc

D-zero/0.5 is a display base that can be placed accessories, watches, bits and bobs.(It depends on the kind of watch and accessories.)

Acrylic plate of about 80x80 3mm thickness requires additional.
(Adjustable height)

Easy Kimekomi by outputting a 3D printer!
(full cover Kimekomi Body)

It has become a model of support basically unnecessary.

It has become a model that assumes the output at a 3d printer fdm method.

There is a case where the output can be difficult depending on the type of slicer and 3d printer.

The output product by direct, indirect damages can not be held responsible in any case.

Image of 1-3 piece is in condition to have a Kimekomi.

Image of the fourth piece is the shading data state.
(With some support (red part))

Accessories in the image is not attached.

Please refer to this http://3dpblog.studiorevent.com/?eid=2 material, tool, work in regard to the steps required Kimekomi.


sample Parameters(Material_PLA)
Layer Thickness_0.32mm
Skin Thickness_1mm
Infill_16.7%
Support_none


About size 164x100x132 mm