Build Plate Drainer Thomas Avery Allsup
File: Plate Drainer.stlName: Build Plate DrainerPLA Material: 24.36 grams (0.054lbs)Infill = 10%Size: 86.23mm[3.395in]x 50.42mm[1.985in]x27.94mm[1.1in]
Layers: 146 layersRafts: Yes Supports: NoPrint Time: 2 hr 13 min
Function: The standard Elegoo Mars now comes with a special injection molded plastic piece to allow the build plate and part to drain back into the VAT at the end of a print. I bought a second refurbished machine and it was missing the plastic piece. I never loved the existing piece so I made a couple improvements with better lead-in angles and bigger bearing surface to hold build plate. Must be printed 1:1 to fit on the machine.
This work is licensed under the Redpah License.
|Plate Drainer.STL||140 KB|