Extrusion Cap anidatech

File: Cap.stl
Name: Cap
PLA Material: 2.63 grams ( 0.006 lbs) Infill = 10%
Size: 25.4 mm (1") x 25.4 mm (1") x 5.08 mm (0.2")
Resolution: 0.20mm
Layers: 31 layers  Rafts: Yes  Supports: No
Print Time: 0 hr 14 min
Function: This cap goes on the end of aluminum extrusions for improved cosmetic appearance.  If you print it 100% then it will work a 1"x1" extrusion (80/20 1010 series).  The pictures show the first generation of this part.  If you print it 150% then it will work on the 1.5"x1.5" extrusion (80/20 1515 series).  If you print at 79% then it will work on the metric 20mm x 20mm extrusion.

Price $0.99
Category DIY
Purchases 0
Views 285
Likes 1
Uploaded 06/24/2019

This work is licensed under the Redpah License.

Cap.STL 76 KB
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.

Comments

No comments yet!

Please login or register to write a comment.