Christmas Bear magnet Sergio Lanna

A Christmas Magnet for your refrigerator or other.

How print in different colors:
To change color you can to cause a filament change and to change the filament or to use separate .gcode files that you can find here.

I strongly recommend printing through separate .gcode files (one for each print level), especially if you need to print more than two levels (colors), because it is a much more precise and reliable method and because you can print even days away from one level to another (without removing the part already printed from the print bed)

Only if you use .gcode files:If you do not immediately print the next levels, it is advisable to heat the print bed, with the previously printed part, for a few minutes before printing.

Where are .gcode files?:
You must rename the filename.gcode.txt files, available here for download, in filename.gcode

ATTENTION:
.gcode files are setting for: PLA filament with Prusa Mendel i3 clone with 0.4 nozzle.


ITALIANO
Una calamita natalizia per il vostro frigorifero o altro apparecchio metallico.

COME STAMPARE IN DIVERSI COLORI:
Per cambiare colore puoi causare un cambio filamento e cambiare il filamento oppure realizzare dei files .gcode separati.

Io consiglio caldamente di stampare tramite separati file .gcode (uno per ciascun livello di stampa), specie se è necessario stampare più di due livelli (colori), perché è un metodo molto più preciso e affidabile e perché si può stampare anche a giorni di distanza da un livello all'altro (senza togliere la parte gia stampata dal letto di stampa)

Solo se usi i file .gcode:
Se non effettui immediatamente la stampa dei livelli successivi, è consigliabile riscaldare il letto di stampa, con la parte stampata precedentemente, per qualche minuto prima di procedere alla stampa.

Dove sono i file .gcode?
Devi rinominare i file, disponibili qui da scaricare, come nomefile.gcode.txt in nomefile.gcode

I file .gcode sono settati per: Prusa Mendel i3 clone con ugello 0.4

Price $0.99
Category Household
Purchases 2
Views 3053
Likes 0
Uploaded 12/22/2018

This work is licensed under the Redpah License.

Bear.stl 405 KB
BearLev1-orange.gcode.txt 761 KB
BearLev2-Black.gcode.txt 216 KB
BearLev3-Red.gcode.txt 121 KB
BearLev4-White.gcode.txt 76 KB
XmasGifts files descriptions.pdf 219 KB
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.

Comments

No comments yet!

Please login or register to write a comment.