crawler excavator model massimiliano conti
crawler excavator model
the instructions for printing are in the info file.
material to be used for large parts:
titanix form future or similar to low deformation (abs)
for the other parts, verbatim abs or z-ultra.
infill 60% - 80% for big parts
infill 100% for small parts
fan 2%
support 20%
In the small parts use light support only towards the support base
for any doubt or difficulty contact me
for bearings:
n° 4 3x8x4
https://www.amazon.it/Cuscinetto-Profonda-Acciaio-3x8x4mm-Miniatura/dp/B078RV2PTN/ref=sr_1_1?ie=UTF8...
n°12 3x12x4
https://www.amazon.it/gp/product/B078NVLJ56/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
M3 screws:
https://www.amazon.it/scatola-Esagonale-Macchina-Fissaggio-Lunghezza/dp/B07BZSV4BC/ref=sr_1_50?ie=UT...
M2,5 screws:
https://www.amazon.it/gp/product/B075RCB31T/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
| Price | $10.00 |
| Category | Hobby |
| Purchases | 0 |
| Views | 1922 |
| Likes | 0 |
| Uploaded | 07/9/2018 |
This work is licensed under the Redpah License.
| base cingoli 1.stl | 1 MB |
| base cingoli 2.stl | 583 KB |
| base cingoli 3.stl | 879 KB |
| braccio.stl | 487 KB |
| fodero pistone 2.stl | 230 KB |
| info.txt | 196 |
| pala.stl | 587 KB |
| pistone 1.stl | 209 KB |
| ruota motrice.stl | 915 KB |
| ruota.stl | 947 KB |
| cingolo 1.stl | 318 KB |
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.
No comments yet!
Please login or register to write a comment.