Sheriff's star with your name (3 colors) Sergio Lanna
Tell me your name and I put on the star.
To create the star in three colors, there are two ways, you can create three separate gcode or use button for change the filament.
I strongly recommend printing through separate gcode (one for each print level), especially if you need to print more than two levels (colors), because it is a much more precise and reliable method and because you can print even days away from one level to another (without removing the part already printed from the print bed)
If you do not immediately print the next levels, it is advisable to heat the print bed, with the previously printed part, for a few minutes before printing.
Otherwise: Basically, you just have to be there when the printer starts printing the pointballs level as soon as you see it starts to make the balls part you must press the button to change the filament, then change the filament to the desired color (be careful not to move the extruder from its position) and press the button to restart printing. Repeat the process when your printer starts printing the words.
If you need star with your name write me
This work is licensed under the Redpah License.
|Star with your name.stl||178 KB|