Weaved Flower Pot Klein Didier

To print this i used the following settings: 
Layer Height: 0.2mm 
Shell Tickness: 0.6mm 
Spiralize 
Bottom of 2mm 
0% infill 
Speed 50mm/s 
On a Ultimaker 2 with these settings at full size (190mm x 100mm x 140mm) it takes 10h to print and uses about 24m of filaments. 
The second part can be printed and glued to reinforce the part where it is fixed on the wall. 
Top and Bottom of 0.8mm Shell of 0.8mm and infill of 30%