Socket Box Template (UK) Gareth
Socket Box template for cutting accurate holes in drywall for UK standard socket boxes. (75x75mm & 75x135mm)
1/ Place template against wall at required height.
2/ Draw around the inside of template,using the square hole for a single box or both holes for a double box.
3/ Cut out lines with pad saw or knife.
Vial used = 40mm long 9.5mm dia.Print Print time = 2hrs 43mins
Infill = 20%Print Quality= 0.2mm
Supports (for vial window on side)
test the vial in template on a known level surface before gluing
This work is licensed under the Redpah License.