Mortar and Pestle Thomas Avery Allsup
File: Mortar and Pestle.stl
Name: Mortar and Pestle
PLA Material: 54.76 grams ( 0.12 lbs)
Infill = 5%
Size: 122.53 mm (4.824") x 101.33 mm (3.989") x 40.37 mm (1.590")
Layers: 208 layers
Print Time: 5 hr 53 min
Function: This is a traditional Mortar and Pestle. For best results, spray this with FDA approved silicone to seal it before you crush any pills. It can be printed at any scale since the pestle matches the mortar but if you print is 1:1 then it will be about 4" (100mm) around and about 1.5" (38mm) tall.
This work is licensed under the Redpah License.
|Mortar and Pestle.STL||1 MB|