C13 Power Brick atanasovgoran

The printed model in the photo is taller, I fixed the model to be at 30mm,
according to the specs of the C13 standard, that makes it only possible to solder the cables because there is not enough space for connectors.
I also I didn't had the right cable so used two cables for every connection. I sealed it with ABS slurry used as a glue, it looks horrible, but is not supposed to be seen, you could have better results if you are careful. If you have any suggestions please feel free.

  1. Print the appropriate power brick and cover.
  2. a. Populate C14 hole with a C14 plug.
    b. Populate the C13 hole with the 4-way C13 connector socket.
    c. Optional Populate the switch hole(if available) with an appropriate switch.
  3. Make the connections (C14 Earth to C13 Earth, C14 Line to Switch Line, Switch Open Side Line to C13 Line, C14 Neutral to Switch Neutral, Switch Open Side Neutral to C13 Neutral).
  4. Put the cover on to the brick and Glue it together.

Price Free
Category DIY
Downloads 3587
Views 2823
Likes 1
Uploaded 03/24/2016
Power_Brick_C13_side_C14_with_switch.stl
(39 KB)
View 3D Render Download
Power_Brick_C13_side_C14_without_switch.stl
(32 KB)
View 3D Render Download
Power_Brick_C13_top_C14_with_switch.stl
(42 KB)
View 3D Render Download
Power_Brick_C13_top_C14_without_switch.stl
(33 KB)
View 3D Render Download
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.

Comments

No comments yet!

Please login or register to write a comment.