Horseshoe Anida Technologies
PLA Material: 28.38 grams ( 0.063 lbs)
Infill = 10%
Size: 111 mm (4.37") x 137.11 mm (5.4") x 13.88 mm (0.546")
Layers: 75 layers
Print Time: 2 hr 37 min
Function: Print your own luck - remember hanging it upside down lets the luck run out...If this is printed 1:1 then it will print a horse shoe sized for a small pony but then again it isn't really meant for actual equestrian use.
This work is licensed under the Redpah License.