Small tripod plate Dyoma

Plate for small tripod, suitable for light camera.
Consists of two parts to improve durability or to ease extraction. As the printed screw can be broken if overtighten I designed an improvement. You may either screw out broken screw from your camera with 3mm hex key. Or you may print hex cylinder and push it into the screw to improve durability.

Size details:
Hex hole is 3.2mm (assuming your printer make it a bit smaller)
Hex cylinder is 3mm

This plate was printed at 0.06mm resolution and 30mm/s speed limit (outer perimeter at 20mm/s).