H frame copter, made on 3D printer Larkin Mikhael

Like
Add To Cart ($0.99)
1.stl 3 MB
3.stl 730 KB
4.stl 3 MB
5.stl 2 MB
6.stl 149 KB
7.stl 3 MB
8.stl 2 MB
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.

Comments

The carbon tubes you linked at 25mm OD, not 20. I ordered https://hobbyking.com/en_us/20-x-18-x-420mm-carbon-fibre-tube-3k-plain-weave-matt-finish.html - guessing this will be ok but leave less room in front for the camera mount is that about right?

Thanks for clarification on the ESCs and motors!
I'm sorry, I said 25mm tube? I was wrong, 20mm tube needed. sorry
"""guessing this will be ok but leave less room in front for the camera mount is that about right?""" - I can not translate
What diameter tubing are you using? Could you post a link?

also it looks like there are 4 ESCs on there is that right - one for each motor?
https://hobbyking.com/en_us/carbon-fiber-round-tube-500x25x23mm.html
Carbon tube 20mm
Left 3 motors one ESC and right 2 mtors one ESC. You need two ESC. motors connect parallel
Please login or register to write a comment.