UFOH! Pikitote

They are here!

The small and greenish finally arrived. And this time it is for real!

The invasion has begun and there's no place to hide, because they are awesome! 

The wheels spins and the capsule opens and closes.

Ready to print without supports in FDM printers.



Layer height 0,2mm for all pieces except the alium.stl, that should be a little more fine, like 0,15 or 0,12.

Print speed 40mm/salium.stl should be printed slowly! Too many details to rush the printer ;)  about 20mm/s or less

The capsule is printed at once. There will be a 0,3mm gap between both parts so you can unstick them (there is a bridge in this file, prepare your active cooling!)
There is an extra capsule in 2 parts that fits together for those that can't put the main capsule working ;)

For the wheels, you should print the tires in flexible filament (it will work great!)
There is an extra file where the tires and the rims are fused together, for those that don't have flexible filament or don't want to have trouble fitting them to the rims.

I hope you have fun with them. Expect no mercy...

Price $1.99
Category Toys
Purchases 1
Views 2252
Likes 3
Uploaded 10/3/2015

This work is licensed under the Redpah License.

4Axis_4Rims.STL 2 MB
4wheel_and_axis.STL 2 MB
4wheels(flex_fil).STL 703 KB
alium.stl 978 KB
capsule.STL 140 KB
capsule_2parts_to_assemble.STL 135 KB
vassel_lower.STL 57 KB
vassel_upper.STL 308 KB
Note: if you want to re-download a file, please do so from your Purchases page or the product page. Download links are set to expire. You might get an error if you try to re-download a file from your browser's downloads page.


No comments yet!

Please login or register to write a comment.